mnocyanide zine plating bright agent - Names and Identifiers
mnocyanide zine plating bright agent - Physico-chemical Properties
| Physical and Chemical Properties | This product is reddish brown viscous liquid. Relative density (25 ℃)1.210~1.22, soluble in water. |
mnocyanide zine plating bright agent - Introduction
PTE-S cyanide-free zinc plating brightener is a chemical reagent commonly used in zinc plating on metal surfaces. It has the following properties:
1. High efficiency: PTE-S cyanide-free galvanizing brightener can complete the high-quality galvanizing process in a short time, making the metal surface bright and shiny.
2. Cyanide-free: Compared with the traditional cyanide galvanizing process, the PTE-S cyanide-free galvanizing brightener does not contain cyanide, thereby reducing the risk of environmental pollution.
3. Easy to operate: PTE-S cyanide-free galvanizing brightener has good operating performance and can adapt to different galvanizing process requirements.
The main uses of PTE-S non-cyanide zinc plating brightener include:
1. Galvanizing protection: The metal surface is plated with a layer of zinc to form a zinc layer to protect the metal from corrosion and oxidation and extend its service life.
2. beautiful surface: through the galvanizing process, the metal surface can show a bright silver white.
The preparation method of PTE-S cyanide-free zinc plating brightener generally includes the following steps:
1. Prepare the solution: Dissolve the salt carrying the metal ion in an appropriate solution according to a certain proportion.
2. Adjust the pH value: Use acid or alkali to adjust the pH value of the metal ions in the solution to meet the requirements of the galvanizing reaction.
3. Galvanizing process: the metal to be galvanized is placed in the plating solution, and a zinc layer is formed on the metal surface through the action of current.
Safety matters needing attention during the galvanizing process include:
1. avoid skin and eye contact: wear protective gloves and goggles when using, avoid touching skin and eyes.
2. ventilation environment: to ensure that the operating site is well ventilated, avoid inhaling harmful gases.
3. Prohibit mixed use: PTE-S cyanide-free zinc plating brightener should not be mixed with other chemical reagents to avoid reaction.
Last Update：2024-04-09 21:21:28